When recycling the waste cars, the big car body or car shells becomes a big problem, we can use a car baler which is especially designed for baling the waste cars.
The car baler has two types for the champer: one is the flat and another type is with the turn around box.
Car Baler for recycling&baling the waste car body or car shell
Introduction for the CAR BALER:
A car baler is also called as a car baling machine or hydraulic car shell compactor, is especialized designed for recycling the waste vahicles. The car baler machine is a piece of equipment which is very popular in the automotive recycling industry. Its primary function is to compress and flatten vehicles, such as cars, trucks,and vans, into compacted bales or flat sheets of metal for easier transportation and recycling. Now Teyun has sold many car balers in many countries like Austrilia, New Zealand, Armenia ect.
The car body baler typically consists of a large hydraulic press mounted on a strong frame. It is designed to apply immense force to vehicles, effectively crushing them and reducing their bulkiness.The compacting process helps to maximize storage space and minimize transportation costs by reducing the volume of the vehicles.
Working Process of the Car Baler:
①Vehicle Preparation: Before being fed into the car baler, the vehicles need to be properly prepared. To remove the following parts, such as fuel, oil, and coolant, as well as the extraction of valuable components,hazardous materials, and non-metallic parts.
②Feeding: The prepared vehicles are then positioned in the press chamber(feeding box) of the car baler. To feed the scrap cars we have two ways to feed, one is with a hydrulic cyliner to push and another way is using the grab to lift the scrap cars and put them into the feeding box. Compressing: Once the vehicle is properly positioned,the hydraulic press is activated, exerting substantial force on the vehicle.The press flattens and compresses the vehicle, reducing it to a compacted bale or a flat sheet of metal.The level of compression depends on the specific design and capabilities of the baling machine. ③Bale or Sheet Removal: After the compression process is completed, the compacted bale or metal sheet is removed from the baling machine.These compacted materials are then transported to metal recycling facilities for further processing.
Car baler machine is specially designed for recycling the car body or car shell, the scrap car after removing the tires, the motors ect with a large volume which is difficult to stack and transport to the recycling centre. This car baler can press the car body into a small bale, this can reduce the cost of transport and place of stock.
Metal scrap baler machine recycling Here are four different of the metal baling machine's bale pushed out ways, bale side push out, front push out, turn out and the manual: And the scrap metal baler can be operated fully automatic or manually handle. Scrap metal baling is an essential process in the metal recycling industry, the machines use hydraulics to operate the pressing mechanic that crushes the scrap metal into bales.
Aluminum extrusion auxiliary equipements including the cooling table, the heating furance, the puller, the aging furance and the mold oven. The puller has two types: single puller and the double puller.
Q90 hydraulic scrap metal shearing machine is widely used in the metal recycling process, it can cut the waste metal into pieces so that easy to pack and transport or sell. The Q90 scrap metal shear is large than the aliigator shear and has more working force.
The scrap metal baler is widely used in the recycling industry, the machine baling the scrap metal like aluminum, cooper,steel and so on into a bale which is easy to transport and save the stock space.
français
русский
español
العربية
日本語
Tiếng Việt
中文
Address : Mingjue Industry Park, Lishui District, Nanjing City, Jiangsu Province
IPv6 network supported