Scrap metal baler for baling the car body car baler

When recycling the waste cars, the big car body or car shells becomes a big problem, we can use a car baler which is especially designed for baling the waste cars. The car baler has two types for the champer: one is the flat and another type is with the turn around box.

The aluminum can delacquering production line is a specialized system designed to remove paint, coatings, and inks from used beverage cans (UBCs) to prepare them for recycling into high-quality aluminum materials. This process is critical for achieving sustainable metal recovery and reducing raw material consumption in the aluminum industry.

Q90 hydraulic scrap metal shearing machine is widely used in the metal recycling process, it can cut the waste metal into pieces so that easy to pack and transport or sell. The Q90 scrap metal shear is large than the aliigator shear and has more working force.

Shredder machine is used for coarse shredding to cutting the unprocessed raw materials or scraps to make them smaller in size. Compared with other crushers, the cutter shaft of shredder machine has lower speed, less noise and lower energy consumption.

alligator shear is a common recycling machine which is used for the scrap meatl recycling to cut the longer or large metal scraps into small pieces.

This hydraulic briquetting press can directly cold-press powdered cast iron scraps, steel scraps, copper scraps, aluminum scraps, etc. into cylindrical cakes of 3 to 6 kg, so as to facilitate transportation, throwing into the furnace, and the whole process does not require heating, additives, or other craft.

Q15 Sheet metal shearing machine is smaller than the  Q91 scrap metal shearing machine. The Q15 sheet metal cuuting machine is used for shearing the non-ferrous metals, plate, copper and so on in the metal recycling process.

Hydraulic Container Shear is used to cut large pieces of scrap metal into smaller, more manageable pieces. It typically consists of a large hooper that holds the scrap metal, a powerful motor, and a shearing blade. The blade is usually made from hardened steel and is designed to cut through thick pieces of metal quickly and efficiently. The container type allows for the easy collection and disposal of the scrap metal after it has been cut. The hydraulic container shear is very popular in the waste metal industry because of its' samll volum but high cutting effiency.