Hydraulic cylinder customized

Q90 hydraulic scrap metal shearing machine is widely used in the metal recycling process, it can cut the waste metal into pieces so that easy to pack and transport or sell. The Q90 scrap metal shear is large than the aliigator shear and has more working force.

The aluminum can delacquering production line is a specialized system designed to remove paint, coatings, and inks from used beverage cans (UBCs) to prepare them for recycling into high-quality aluminum materials. This process is critical for achieving sustainable metal recovery and reducing raw material consumption in the aluminum industry.

Aluminium extrusion machine is the most important equipment to realize aluminium extrusion processing. Its important feature is that the metal ingots are processed into tubes, rods, and profiles at a time.

Teyun extrusion is the manufacturer of aluminum extrusion press and the cooper extrusion machine, we has specilized in this industry for over 30 years. The aluminum/cooper extrusion press machine is the most equipment of the whole aluminum/cooper  extrusion line, which is used for producing the aluminum profiles, the aluminum wire, the cooper tube and ect. If you are interested in, we can offer you the full plan of the aluminum/cooper extrusion press line.

This hydraulic briquetting press can directly cold-press powdered cast iron scraps, steel scraps, copper scraps, aluminum scraps, etc. into cylindrical cakes of 3 to 6 kg, so as to facilitate transportation, throwing into the furnace, and the whole process does not require heating, additives, or other craft.

Teyun heavy duty hydraulic scrap metal baler has the 500ton, 630ton, 800ton,1000ton and even the 2000ton types. This scrap metal baler is usually used to press the scrpa metal to save the transport cost and space which is very popolar in the recycling industry.

The scrap metal baler is widely used in the recycling industry, the machine baling the scrap metal like aluminum, cooper,steel and so on into a bale which is easy to transport and save the stock space.

Waste metal cutting machine for recycling The super alligator shear is also well known as the name of Tiger shear, which is mainly used in the waste metal recycling industry. The waste metal shearing machine cut the thin metal which is in the lager size or long lenth into the customized size. This cutting process can save the scrap metal storage space and the transports cost. The super alligator shear makes the metal recycling more easier. Tiger shears are suitable for scrap steel cutting, and have the advantages of large cutting opening and large blade length. There are three methods of chain plate transmission, hydraulic motor transmission, and cylinder push feeding. At the same time, the shearing speed is fast, which can reach 8~12 times per minute. There are two main types of this model, 450 type and 630 type.  1.Fully automatic PLC control, single control or continuous operation  2.Large cutting opening and large blade length  3.Lower noise and smaller volume  4.High working speed, can up to8~12t/min