Hydraulic alligator scrap metal shearing machine

Q90 hydraulic scrap metal shearing machine is widely used in the metal recycling process, it can cut the waste metal into pieces so that easy to pack and transport or sell. The Q90 scrap metal shear is large than the aliigator shear and has more working force.

The super alligator shear is also called the tiger shear in China, which is mainly used in the waste material recycling and industry. The super alligator shear is suitable for cuuting the thin and medium size of the steel mills,  the shear can cut kinds of scrap metal into samller pieces.

Waste metal cutting machine for recycling The super alligator shear is also well known as the name of Tiger shear, which is mainly used in the waste metal recycling industry. The waste metal shearing machine cut the thin metal which is in the lager size or long lenth into the customized size. This cutting process can save the scrap metal storage space and the transports cost. The super alligator shear makes the metal recycling more easier. Tiger shears are suitable for scrap steel cutting, and have the advantages of large cutting opening and large blade length. There are three methods of chain plate transmission, hydraulic motor transmission, and cylinder push feeding. At the same time, the shearing speed is fast, which can reach 8~12 times per minute. There are two main types of this model, 450 type and 630 type.  1.Fully automatic PLC control, single control or continuous operation  2.Large cutting opening and large blade length  3.Lower noise and smaller volume  4.High working speed, can up to8~12t/min

This hydraulic briquetting press can directly cold-press powdered cast iron scraps, steel scraps, copper scraps, aluminum scraps, etc. into cylindrical cakes of 3 to 6 kg, so as to facilitate transportation, throwing into the furnace, and the whole process does not require heating, additives, or other craft.

Hydraulic guillotine shear machine for recycling waste metal Q91 Series scrap metal shearing machine is heavy duty machine which looks like the guillotine so is also called the guillotine shear or the gantry shear in China. The hydraulic gantry shear is normally used for cutting the waste steel, steel bar,steel plate,scrap cooper, waste sheet metal and so on in the recycling industries. Compared with the Q15 or Q90, this kind of the gantry shear is larger and more heavy. Beause the guillotine shear can satisfy large demend of the scrap metal with high working speed. Ø  PLC automatic control and single control or continuous operation Ø  Can configured scrap metal feeding box with Hydraulic motor or cylinder push Ø  Can configured remote control with high security Ø  Can configured feeding box cover. It’s better for the thin metal

The scrap metal baler is widely used in the recycling industry, the machine baling the scrap metal like aluminum, cooper,steel and so on into a bale which is easy to transport and save the stock space.

Metal scrap baler machine recycling Here are four different of the metal baling machine's bale pushed out ways, bale side push out, front push out, turn out and the manual: And the scrap metal baler can be operated fully automatic or manually handle. Scrap metal baling is an essential process in the metal recycling industry, the machines use hydraulics to operate the pressing mechanic that crushes the scrap metal into bales.

Shredder machine is used for coarse shredding to cutting the unprocessed raw materials or scraps to make them smaller in size. Compared with other crushers, the cutter shaft of shredder machine has lower speed, less noise and lower energy consumption.