Alligator shear for cutting waste metal sheet

Alligator shear is also called crocodile shear machine, which is usuallay used for cuuting the long metal stock or scrap in the metal recycling industry.

Crocodile shear is also called the alligator machine, which is usuallay used for the scrap meatl recycling, with this shear to cut the longer or large metal scraps into small pieces.

alligator shear is a common recycling machine which is used for the scrap meatl recycling to cut the longer or large metal scraps into small pieces.

Teyun heavy duty hydraulic scrap metal baler has the 500ton, 630ton, 800ton,1000ton and even the 2000ton types. This scrap metal baler is usually used to press the scrpa metal to save the transport cost and space which is very popolar in the recycling industry.

This kind of scrap metal shearing machine is larger than the alligator shear, so we call it the super alligator shear and also have the name of "tiger shear" in China.

Teyun extrusion is the manufacturer of aluminum extrusion press and the cooper extrusion machine, we has specilized in this industry for over 30 years. The aluminum/cooper extrusion press machine is the most equipment of the whole aluminum/cooper  extrusion line, which is used for producing the aluminum profiles, the aluminum wire, the cooper tube and ect. If you are interested in, we can offer you the full plan of the aluminum/cooper extrusion press line.

Briquetting machine is usually used for pressing the scrap metal like iron, steel copper, aluminum powder or chips into a small bale. This briquetting process enduces the cost of transports and stock, which is widely used in the metal recycling industry.

Waste metal cutting machine for recycling The super alligator shear is also well known as the name of Tiger shear, which is mainly used in the waste metal recycling industry. The waste metal shearing machine cut the thin metal which is in the lager size or long lenth into the customized size. This cutting process can save the scrap metal storage space and the transports cost. The super alligator shear makes the metal recycling more easier. Tiger shears are suitable for scrap steel cutting, and have the advantages of large cutting opening and large blade length. There are three methods of chain plate transmission, hydraulic motor transmission, and cylinder push feeding. At the same time, the shearing speed is fast, which can reach 8~12 times per minute. There are two main types of this model, 450 type and 630 type.  1.Fully automatic PLC control, single control or continuous operation  2.Large cutting opening and large blade length  3.Lower noise and smaller volume  4.High working speed, can up to8~12t/min