Electromagnet for lifting the scrap metal

Lifting Electromagnet is special equipment which is also matched with the scrap metal baler or waste metal shear to attach materials into the feeding box. The lifting eletromagnet saves the labor cost.

Car baler machine is specially designed for recycling the car body or car shell, the scrap car after removing the tires, the motors ect with a large volume which is difficult to stack and transport to the recycling centre. This car baler can press the car body into a small bale, this can reduce the cost of transport and place of stock.

The plastic bottle vertical baler is usually used for baling waste paper (cardboard boxes, newsprint, etc.), waste plastics (PET bottles, plastic films, turnover boxes, etc.), straw and other loose materials.

According to the driving method, the grab bucket can be divided into two kinds: hydraulic grab and mechanical grab.

Hydraulic Container Shear is used to cut large pieces of scrap metal into smaller, more manageable pieces. It typically consists of a large hooper that holds the scrap metal, a powerful motor, and a shearing blade. The blade is usually made from hardened steel and is designed to cut through thick pieces of metal quickly and efficiently. The container type allows for the easy collection and disposal of the scrap metal after it has been cut. The hydraulic container shear is very popular in the waste metal industry because of its' samll volum but high cutting effiency.

Q90 hydraulic scrap metal shearing machine is widely used in the metal recycling process, it can cut the waste metal into pieces so that easy to pack and transport or sell. The Q90 scrap metal shear is large than the aliigator shear and has more working force.

This hydraulic briquetting press can directly cold-press powdered cast iron scraps, steel scraps, copper scraps, aluminum scraps, etc. into cylindrical cakes of 3 to 6 kg, so as to facilitate transportation, throwing into the furnace, and the whole process does not require heating, additives, or other craft.

The aluminum extrusion cooling table (26*6m) is mainly used for cooling and conveying the aluminum profile which realizes the straightening and cutting of the aluminum material through the cooperation of the tractor, the straightening machine, the interrupting saw and so on.